Step 1: Select "Tension Pole" or "Wall Mounted Hub"
Step 2: Choose a pre-configured kit or DIY design
Step 3: For DIY, first select your Tension Pole OR Hub(s), then add steps, etc. from the "Components" tab.
-
Get Started
-
Tension Pole
-
Wall Mounted Hub
-
Components
-
How to Order
-
Pole vs. Wall-Mounted Hub
What to consider in deciding between the floor-to-ceiling pole, OR the wall-mounted "Hub" sections.
- The Tension Pole is not designed for ceilings over 10 ft (120 in) tall OR vaulted ceilings.
- Are you permitted to attach anything to your walls?
- Are you comfortable locating and attaching to studs in your walls?
- Do you want to do a "horizontal" setup, or vertical tower?
- Would you like a pre-configured kit, or design-your-own, ala-carte?
-
Pre-Configured Kits
-
DIY Pole
Kit includes the Pole, 2 x Platforms, 5 x Steps and 1 x Feeder
Elevation II Cat Tree Kit
Sold out
Free Shipping | We Pay The Tax
Elevation Pole
Sold out
Free Shipping | We Pay The Tax
-
Description
-
Materials
-
Shipping/Returns
The modular Elevation-II tower allows you to create a beautiful and functional custom vertical space for your cats that is sure to be a real conversation piece! This is a floor-to-ceiling "tension pole" system with slots every 4" that accept the steps, platforms, feeders and now even plant holders! We hand craft this product from scratch here in Matthews, NC. We think you'll be quite happy with the way it looks, but take special satisfaction in how SOLID it is.
The full kit contains 5 steps and 2 large platforms (and for a limited time, we are also throwing in a FREE feeder!) Works for ceiling heights between 7'9" - 10 ft". (You'll need to know your ceiling height in order to select one of four sizes). PLEASE BE SURE TO MAKE A SELECTION FOR CEILING HEIGHT!
If you are building your tower ala-carte, you'll need to add the pole to your cart, and then select from the other tabs whatever combination of components you want.
Our towers are made of domestically grown and locally sourced birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.
Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs. Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.
-
Pre-Configured Kits
-
DIY Hub
Kit includes 3 x Hubs, 5 x Steps and 2 x Platforms
The 3 Hub Kit
Sold out
Free Shipping | We Pay The Tax
-
Description
-
Materials
-
Shipping/Returns
The modular HUB is a wall mounted section of our Elevation-II pole, allowing you limitless configurations of steps, arranged vertically, horizontally, or even diagonally! It is mounted directly to a wall stud, making it extremely sturdy. Notches every 4" accept the steps, platforms, feeders and now even plant holders! We hand craft this product from scratch here in Matthews, NC.
This kit can be configured vertically, horizontally, or any way you like! If you need additional components, simply select them from the "Components" tab.
Our towers are made of domestically grown and locally sourced birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.
Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs. Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.
Steps sold separately
The Hub
Sold out
Free Shipping | We Pay The Tax
-
Description
-
Materials
-
Shipping/Returns
The modular HUB is a wall mounted section of our Elevation-II pole, allowing you limitless configurations of steps, arranged vertically, horizontally, or even diagonally! It is mounted directly to a wall stud, making it extremely sturdy. Notches every 4" accept the steps, platforms, feeders and now even plant holders! We hand craft this product from scratch here in Matthews, NC.
Once you have your design in mind, just add one or more Hubs to your cart, and then select whatever combination of components you want from the "Components" tab.
Our towers are made of domestically grown and locally sourced birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.
Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs. Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.
-
Platform
-
Step
-
Feeder
-
Plant Holder
Elevation Platform
Sold out
Free Shipping | We Pay The Tax
Elevation Step
Sold out
Free Shipping | We Pay The Tax
Elevation Feeder
Sold out
Free Shipping | We Pay The Tax
Elevation Plant Holder
Sold out
Free Shipping | We Pay The Tax
-
Description
-
Materials
-
Shipping/Returns
All of our components (steps, platforms, feeders, plant holders) are compatible with BOTH the tension-pole system as well as the wall-mounted system. The wall-mounted "HUB" is essentially a 2 ft section of the tension pole mounted on brackets. If you're designing your own setup, you'll need to consider the age & agility of your cats and adjust the spacing between components accordingly.
Our towers are made of domestically grown and locally sourced birch plywood. There is no particle board or mdf in our products and they are designed to last for decades, not just years! We sand each piece by hand so that it can be used as-is, or stained/painted if you desire.
Shipping is included with your purchase and we ship out of Charlotte, NC, via Fedex Ground. We typically ship within 24-48 hrs. Returns are allowed within 30 days of purchase, for any reason, and return shipping cost is the responsibility of the buyer. If there are any defects in the product, or if it gets damaged during shipping, we will replace any damaged components at no cost to you whatsoever.